Respironics REMstar Pro User Manual Download

Page: 53 / 64

7-1

REM

STAR

M S

ERIES

SER

ANUAL

HAPTER

7: C

LEANING

AND

AINTENANCE

This chapter describes how to clean the device and its ﬁlters and provides tips on traveling with

your REMstar Pro M Series system.

7.1 C

LEANING

THE

EVICE

Warning:

To avoid electrical shock, always unplug the power cord from the wall
outlet or DC power source before cleaning the device.

Caution:

Do not immerse the device in liquid or allow any liquid to enter the
enclosure, inlet ﬁlter, or any opening.

1. Unplug the device, and wipe the outside of the device with a cloth slightly dampened with

water and a mild detergent. Let the device dry completely before plugging in the power cord.

2. Inspect the device and all circuit parts for damage after cleaning. Replace any damaged parts.

7.2 C

LEANING

EPLACING

THE

ILTERS

Caution:

Operating the device with a dirty ﬁlter may keep the system from working

properly and may damage the device.

Under normal usage, you should clean the gray foam ﬁlter at least once every two weeks and

replace it with a new one every six months. The white ultra-ﬁne ﬁlter is disposable and should be

replaced after 30 nights of use or sooner if it appears dirty. DO NOT clean the ultra-ﬁne ﬁlter.

Caution:

Dirty inlet ﬁlters may cause high operating temperatures that may aﬀect

device performance. Regularly examine the inlet ﬁlters as needed for integ-
rity and cleanliness.

1. If the device is operating, stop the airﬂow by pressing the

button. Disconnect the device

from the power source.

2. Remove the ﬁlter(s) from the enclosure by gently squeezing the ﬁlter in the center and pull-

ing it away from the device, as shown in Figure 7–1.

Summary of Contents for REMstar Pro

































































Search results

Summary of Contents for REMstar Pro

Reviews:

Related manuals for REMstar Pro

Brands by name

Popular brands

Respironics REMstar Pro, User Manual

Search results

Summary of Contents for REMstar Pro

Reviews:

Related manuals for REMstar Pro

Brands by name

Popular brands