Respironics REMstar Pro User Manual Download

Page: 52 / 64

6-2

REM

STAR

M S

ERIES

SER

ANUAL

6.2 U

SING

THE

MART

ARD

Some REMstar Pro M Series systems come with a SmartCard accessory module installed in the

accessory slot on the back of the device to record information for the home care provider. Your

home care provider may ask you to periodically remove the SmartCard and send it to him/her for

evaluation.

Note:

The SmartCard does not need to be installed for the device to work properly.
The SmartCard records device usage information for use by your home care
provider. Contact your provider if you have any questions about the SmartCard.

6.3 A

DDING

UPPLEMENTAL

XYGEN

Oxygen may be added at the mask connection. Please note the warnings listed below when using

oxygen with the device.

ARNINGS

• When using oxygen with this system, the oxygen supply must comply with local regulations

for medical oxygen.

• When using oxygen with this system, a Respironics Pressure Valve (Part number 302418)

must be placed in-line with the patient circuit. Failure to use the pressure valve could result

in a ﬁre hazard.

• Oxygen accelerates ﬁres. Keep the device and the oxygen container away from heat, open

ﬂames, any oily substance, or other sources of ignition. Do not smoke in the area near the

device or the oxygen.

• When using oxygen with this system, turn the device on before turning on the oxygen. Turn

the oxygen oﬀ before turning the device oﬀ. This will prevent oxygen accumulation in the

device.

• If administering ﬁxed-ﬂow supplemental oxygen, the oxygen concentration may not be con-

stant. The inspired oxygen concentration will vary, depending on the CPAP setting, patient

breathing pattern, and leak rate. Substantial leaks around the mask may reduce the inspired

oxygen concentration to less than the expected concentrations. Appropriate patient monitor-

ing should be implemented.

Summary of Contents for REMstar Pro

































































Search results

Summary of Contents for REMstar Pro

Reviews:

Related manuals for REMstar Pro

Brands by name

Popular brands

Respironics REMstar Pro, User Manual

Search results

Summary of Contents for REMstar Pro

Reviews:

Related manuals for REMstar Pro

Brands by name

Popular brands