Respironics REMstar Pro User Manual Download

Page: 51 / 64

6-1

REM

STAR

M S

ERIES

SER

ANUAL

HAPTER

6: A

CCESSORIES

Contact your home care provider for additional information on the accessories available for your

REMstar Pro M Series system. When using optional accessories, always follow the instructions

enclosed with the accessories.

6.1 A

DDING

UMIDIFIER

You can use the M Series Heated humidiﬁer or the M Series Pass-over humidiﬁer with your

device. They are available from your home care provider. A humidiﬁer may reduce nasal dryness

and irritation by adding moisture (and heat, if applicable) to the airﬂow. Figure 6–1 shows the

humidiﬁer by itself and attached to the REMstar Pro M Series device.

Caution:

For safe operation, the humidiﬁer must always be positioned below the

breathing circuit connection at the mask and the air outlet on the device.
The humidiﬁer must be level for proper operation.

Humidifer without Device

Humidifer Device Attached

IGURE

6–1 H

UMIDIFIER

LONE

AND

TTACHED

THE

EVICE

Refer to the humidiﬁer’s instructions for complete setup information.

Summary of Contents for REMstar Pro

































































Search results

Summary of Contents for REMstar Pro

Reviews:

Related manuals for REMstar Pro

Brands by name

Popular brands

Respironics REMstar Pro, User Manual

Search results

Summary of Contents for REMstar Pro

Reviews:

Related manuals for REMstar Pro

Brands by name

Popular brands