Respironics bilichek, Service Manual

Page: 34 / 36

BiliChek Service Manual
34
1014988
♦
Gently grasp the pin with a pair of small needle-nose
pliers or equivalent and pull straight up. Once the pin
is removed, a new pin can be inserted in the same
manner. New pins (RI P/N 1014776) can be ordered
from Respironics or your local distributor.
13.3 Hand-Held Unit (HHU) Repair
The Hand-Held unit (HHU) is not field-serviceable with the
exception of the measurement light bulb. The unit must be
returned to Respironics for service. If the HHU is opened, the
accuracy of the instrument cannot be guaranteed and any
remaining warranty will be voided.
13.4 Power Supply Repair/Replace-
ment
The power supply has no serviceable components. In the
event of failure, it must be replaced. If the failure occurs
during the warranty period of the system, it will be replaced at
no charge by Respironics. Out of warranty replacements can
be purchased from Respironics or your local distributor.
13.5 Battery Pack Repair/Replacement
The Bili Chek battery pack contains 5 Ni-Cd batteries and is a
sealed unit. Any attempt to open will destroy the pack. It is
not repairable and will be exchanged at no charge during
warranty. Out of warranty replacements may be purchased
from Respironics or your local distributor.
NOTE: For diagnosis of suspected battery pack failure, see
section 11.1 and section 11.3.1.
NOTE: Batteries must be disposed of properly and in accor-
dance with local ordinance. Do not incinerate or throw in
trash or land fills.
14.0 Software Upgrades
As software upgrades are required for system options or
enhancements, instructions, software, and any required tools
or equipment needed for the upgrade will be sent if requested.
NOTE: There may be a charge for software upgrades that are
not required for product safety or effectiveness. Check with
your local distributor for information regarding upgrades.