P
AGE
35
1054417, V
ER
. 01
Alice
®
PDx
TM
Service & Technical Reference Manual
R
EPLACING
THE
P
OWER
B
UTTON
To remove the Power Button:
1. Remove the Battery Door and Batteries. Refer to page 32 for removal instructions if necessary.
2. Remove the Battery Enclosure. Refer to page 33 for removal instructions if necessary.
3. Remove the Battery PCA. Refer to page 34 for removal instructions if necessary.
4. Lift the Power Button out of the Battery Enclosure Cover (part of the Clamshell Assembly).
F
IGURE
E: P
OWER
B
UTTON
R
EMOVAL
/I
NSTALLATION
(
ENTIRE
C
LAMSHEELL
A
SSEMBLY
NOT
SHOWN
)
To install the Power Button:
1. Place the Power Button in the opening of the Battery Enclosure Cover. Ensure the raised center of
the Button is seated in the opening of the Battery Enclosure Cover and the Button’s notch is prop-
erly oriented.
2. Assemble the remainder of the Alice PDx as necessary.
Power Button
During installation, ensure the
raised center on the Power
Button is seated in the opening
of the Battery Enclosure Cover
and the notch in the Power
Button is oriented properly.
