Interface Specification Document
6.3.1.16 Bathymetric Data Output Selection (bathy only)
•
DESCRIPTION:
This message selects the output port for bathy data.
•
SYNTAX:
*DOUT,N<CR><LF>
•
PARAMETERS:
N – Output selection parameter. 0 for RS-232 or 1 for Ethernet.
•
EXAMPLE:
*DOUT,1<CR><LF>
This example sets processor unit to output bathy data on the Ethernet port.
6.3.1.17 Maximum Ping Rate
•
DESCRIPTION:
This message sets the maximum ping rate in pings per second.
•
SYNTAX:
*DRAT,N<CR><LF>
•
PARAMETERS:
N – Max data pings goes from 10 to 400 (= 1.0 to 40.0 pings per second).
•
EXAMPLE:
*DRAT,200<CR><LF>
This message sets processor to output a maximum of 20 pings per second.
6.3.1.18 Filter Setting (bathy only)
•
DESCRIPTION:
This message sets which filters should be used.
•
SYNTAX:
*FILT,N<CR><LF>
•
PARAMETERS:
N – Filter selection.
0 – No filter.
1 – Range filter only.
2 – Depth filter only.
3 – Both filters.
•
EXAMPLE:
*FILT,1<CR><LF>
This example sets processor to use the range filter only.
6.3.1.19 Flip
•
DESCRIPTION:
This message tells the 81-P processor box of the orientation for the head.
•
SYNTAX:
*FLIP,N<CR><LF>
•
PARAMETERS:
N – Orientation value.
0 – Projector forward/up.
1 – Projector aft/down.
•
EXAMPLE:
*FILP,0<CR><LF>
This message tells 81-P processor that the head is mounted with projector forward.
______________________________________________________________________
SeaBat 8101 Operator's Manual
6-11
(ISD Rev 1.23) Version 3.02
