Interface Specification Document
6.3.1.20 Freeze
•
DESCRIPTION:
This message freezes the data in the wedge on the sonar screen.
•
SYNTAX:
*FREZ,N<CR><LF>
•
PARAMETERS:
N – Freeze selection. 0 for OFF and 1 for freeze.
•
EXAMPLE:
*FREZ,1<CR><LF>
This example freezes the data on the screen.
6.3.1.21 Force Wet Download (8101 / 8111 only)
•
DESCRIPTION:
This message forces the 81-P to download the new firmware into the sonar head bypassing
the version number verification check.
•
SYNTAX:
*FWET,N<CR><LF>
•
PARAMETERS:
N – Download mode
0 – Stop the download
1 – Begin download using method 1 (good uplink required)
2 – Begin download using method 2 (uplink not required)
•
EXAMPLE:
*FWET,1<CR><LF>
This example forces a wet download when a good uplink is available.
6.3.1.22 Manual
Gain
•
DESCRIPTION:
This message sets the manual gain for the 81-P processor.
•
SYNTAX:
*GAIN,N<CR><LF>
•
PARAMETERS:
N – Manual gain value.
•
EXAMPLE:
*GAIN,1<CR><LF>
This example sets the 81-P processor to the minimal manual gain, 1.
6.3.1.23 Grid
•
DESCRIPTION:
This message sets different grid options.
•
SYNTAX:
*GRID,N<CR><LF>
•
PARAMETERS:
N – Grid value.
0 – Off, no grid.
1 – Just the border.
2 – Border and lines.
3 – Full.
•
EXAMPLE:
*GRID,1<CR><LF>
This example sets the processor to display only the border around the wedge.
______________________________________________________________________
SeaBat 8101 Operator's Manual
6-12
(ISD Rev 1.23) Version 3.02
