28
Data management and therapy compliance
For therapy compliance management, the AirSense 10 device stores patient data on the device and
has the ability to transfer it remotely to the care provider. Data can then be accessed via ResMed's
AirView
™
compliance management solution.
The AirSense 10 device also stores data on the SD card. This data can be transferred via an SD Card
Reader to ResMed's ResScan
™
patient management system.
For more information on compliance management with AirView or ResScan, refer to the manuals
supplied with the software.
Remote monitoring
The AirSense 10 device has cellular communication which has the ability to automatically transmit
summary and night profile data on a regular basis. It also allows you to change settings remotely.
The Wireless signal strength icon
displayed at the top right of the screen indicates the signal
strength. Advise the patient to check the signal strength on their device.
Notes:
Therapy data might not be transmitted if used outside of the country or region of purchase.
Devices with cellular communication might not be available in all regions.
SD card
Every AirSense 10 device comes with an SD card already inserted and ready to be used. Once the
data is loaded into ResScan or AirView via the SD Card Reader, you can review and analyze data, as
well as update therapy settings and transfer them to the patient’s device via the SD card.
1.
Open the SD card cover.
2.
Push in the SD card to release it. Remove the SD card from the device.
Do not remove the SD card from the device when the SD light is flashing.
To insert the SD card:
1.
Open the SD card cover.
2.
Push the SD card into the device until it clicks.
The following message is briefly displayed:
Preparing SD card, do not remove power or your
card
.
Summary of Contents for AirSense S10
Page 1: ...Clinical guide English ...
