resideo M35758A, Homeowners Operating Manual, Page: 11 / 48

EVER
YD
AY
OPERA
TION
Once the Electrode Steam is installed and running, operation is automatic. Use the humidity control provided
to make any changes to the setpoint, or to turn the Electrode Steam on or off.
Your Professional Installer configured the Electrode Steam so that it only creates steam when conditions in
your HVAC system are right. Steam can only be produced when your system fan is blowing air through the
duct.
Ask your Professional Installer if you have questions about how to operate the Electrode Steam.
• How do I use the humidity control? Whenever humidity in the home is lower than the humidity control’s
setpoint, the control will call for humidity. Some controls will also monitor outdoor conditions to ensure
indoor humidity does not condense on windows and walls. Refer to the manual provided with your
humidity control for instructions on setting the control. There are two different types of humidity control:
How do I operate the Electrode Steam?
Steam Humidification System 33-00165EFS—03 9
Humidity control separate from the
thermostat (such as the HumidiPRO).
With this arrangement, you will use your
current thermostat to control your furnace
and central air conditioning. Use the separate
humidity control to control your Electrode
Steam.
Thermostat with integrated humidity
control (such as Prestige IAQ, VisionPRO
8000, or The Round).
This arrangement allows you to control
your furnace, central air conditioning, and
Electrode Steam, all with one device.