Tactical ResQmax Operation Manual
18
Figure 18b - Nozzle Valve CLOSED
Figure 18c -
Retract Collar
Figure 18d -
Attach Filler Hose
Figure 18a - Nozzle Valve OPEN
AIR FLOW
Valve perpendicular and CLOSED
If the Valve Key is perpendicular to the flow of air, then the Valve is
CLOSED
(Fig. 18b).
Filling the Projectile
To properly fill the Projectile you need a source of compressed air that is capable at least of
reaching the service pressure of the Projectile. The Standard Projectile has a service pressure of
3000 psi / 207 Bar. The Streamline Filler Hose Assembly is required to recharge the Projectiles
with compressed air. It consists of a Filler Block
,
that includes a Pressure Gauge and Bleed Screw,
and the Filler Hose connecting the compressed air source.
Begin by attaching the end of the Streamline Filler Hose Assembly, equipped with the proper
adapter (Fig. 3, pg. 8), to your compressed air source.
Next, check in which position is the Valve Key on the Projectile to be filled:
If the Valve Key is in line with the flow of air, then the Valve is
OPEN
(Fig. 18a).
To charge the Projectile, follow these steps:
1. Connect the appropriate Filler Hose
Adapter to the associated Air Supply.
2. Connect the Filler Hose to the Filler Hose
Adapter by retracting the spring-loaded
Quick Coupler on the end of the Streamline
Filler Hose opposite from the Filler Block
end (Fig. 3, pg. 8).
3. Retract the spring-loaded Quick Coupler on
the Streamline Filler Hose Assembly closest
to the Filler Block (Fig. 18c) and insert the
neck of the Quick Coupler inside the Nozzle
Protector to connect the Filler Hose to the
Nozzle (Fig. 18d).
AIR FLOW
Note:
Use
Compressed Air
Only.
The use of
any flammable
or combustible
compressed
gases,
especially at
high pressures,
may result in a
spontaneous
explosion
causing severe
injuries or death.
Note:
The operating/
service pressure
of the Projectile
should only be
exceeded in
response to a
life-threatening
emergency
and under no
circumstances
should it be
exceeded by
more than
20%. Ignoring
this advice
may cause an
accident that
could result in
bodily injury or
death.
Valve “in line” and OPEN
Quick Coupler
Filler Block
