Tactical ResQmax Operation Manual
15
Operating the Nozzle Valve to Pressurize the Launcher
The Valve in the Nozzle of each Projectile is to be opened using the Valve Key attached to the
Launcher housing.
The Valve Key is spring-loaded and by default its resting position is “NOT Engaged.”
Figure 13a - Valve Key NOT Engaged
Figure 13b - Valve Key Engaged
The Valve Key is engaged with the Nozzle Valve when fully depressed (Fig. 13b).
The Valve Key is NOT engaged with the Nozzle Valve when fully extended (Fig. 13a).
“V” Groove
Note:
Not Engaged
Note:
Engaged
Figure 14 - Opening Nozzle Valve
Closing the Nozzle Valve in the Launcher
To open the Nozzle Valve in the Launcher, follow these steps:
1. Press the Valve Key all the way in while in the vertical position, so that the Valve Key makes
contact with the Nozzle Valve (Fig. 14 - Step 1).
Maintain constant pressure.
2. While maintaining contact with the Nozzle Valve, rotate the Valve Key 90º
in a clockwise
direction (Fig. 14 - Step 2). After rotating full 90º, release the Valve Key allowing it to extend
fully and disengage from the Nozzle Valve (Fig. 13a).
Opening the Nozzle Valve in the Launcher
To close the Nozzle valve in the Launcher, follow these steps:
1. Press the Valve Key all the way in while in the horizontal position, so that the Valve Key makes
contact with the Nozzle Valve (Fig. 15 - Step 1).
Maintain constant pressure.
2. While maintaining contact with the Nozzle Valve, rotate the Valve Key 90º in a counter-
clockwise direction (Fig. 15 - Step 2). After rotating full 90º, release the Valve Key allowing it
to extend fully and disengage from the Nozzle Valve (Fig. 13a).
Figure 15 - Closing Nozzle Valve
Step 2:
Rotate
Step 1:
Press In
Step 2:
Rotate
Step 1:
Press In
Note:
Some initial
resistance may
be experienced
when trying to
turn the Valve
Key. However,
once the Key
begins to rotate
it will turn easily.
Be certain to
rotate the Valve
Key clockwise
full
90º.
Note:
When installed
in the Launcher,
a charged
Projectile will
have the Nozzle
Valve in the
vertical CLOSED
position.
