background image

 

 
 
 

 
 

 

 
 
 

 
 
 

 
 
 

 
 
 

 
 
 
 
 

 
 
 

 
 

 
 
 
 

 
 
 
 
 
 

 
 
 
 

 
 
 

 
 
 

 
 

 

Thank you for purchasing the Reporter Oracle gate system. 

This product has been designed and manufactured in the USA, 

utilizing the highest quality standards available. 

 

Ver. 022206  

Patents pending

The Oracle Gate System is designed to be
the wire-free solution to enhance the
operation of accessory-ready Automatic
Gate Openers. With up to Two years of
battery life, the Gate Access Panel and
Oracle System Accessories can be used to
remotely activate up to two Gate Control
Modules.

 
 
 

 
 

 

 

Features Include 

 

• 

Controls up to Two Different Gate 

Openers or other accessories 

• 

Proximity Detector with Backlit 

key-pad after dark 

• 

Remote Keyless Entry  

• 

Up to 2 years between changing 

batteries

 

• 

Digitally Secure Intercom Link. 

 

• 

Up to 5 PIN access numbers 

 

   

 

 

 
 
 
 
 

 

 

CONTENTS 

 

New Features and version info Addendum

 

• 

• 

Installation and Set-up 

 

Initializing a new Master PIN code 

Activating the Gate Access Unit 

 

Activating Oracle Accessories 

 

Activating a new Gate Control Unit 

Activating Key-fob Remotes 

Activating Intercoms and Accessories 

 

• 

• 

• 

Gate Control Unit (GCU) Installation 

 

Basic Gate Controller Installation 

Setting the Gate Controller ID (1-2) 

 

General Operation

 

 

Intercom Function 

Opening and Closing a Gate 

 

 

Oracle System Intercom Settings 

 

Intercom Gate Status Display 

Flush-Mount Intercom Settings 

Portable Intercom Settings 

 

 
 

PIN Codes 

• 

• 

• 

User-level PIN codes 

Removing User-Level PIN Codes 

Changing the Master PIN Code 

 

Batteries

 4 

 

Gate Panel Settings 

 

Speaker Volume 

Mic. Sensitivity  

Keypad Illumination Brightness 

Alternate Channel Group Selection 

 

• 

• 
• 
• 
• 

Operating Modes 

 

Power-Save Mode 

 

 

Appendix-A

, Keypad commands 

Appendix-B

, Gate Controller Configurations 

FAQ and Troubleshooting 

 

Product Support 

&

 Warranty

 8 

 

 

FCC STATEMENT 

This device complies with FCC part 15 rules. It may not cause harmful interference with other devices, and must accept interference from other devices.

FCC ID: JLFTRX 

Summary of Contents for Oracle 3000










Reviews: