Allows you to specify a descriptive name for the units geographical
location.
Latitude
Latitude for node location on digital map. Could also be selected by
the “Select location on map” or “Get location” buttons
Longitude
Longitude for node location on digital map. Could also be selected
by the “Select location on map” or “Get location” buttons.
Contact
Administrative contact person for this unit.
Status LED
Visual signal level/link status indicator. Can be set to pulse mode
or disabled. If set to “pulse mode” the LEDs will blink according to
the current signal strength.
Buzzer
Auditory signal level/link status indicator.
Off - No sound.
Combined - Indicate for the weaker of both chains.
Chain 1 - Indicate for chain 1 only.
Chain 2 - Indicate for chain 2 only.
Signal indication sounds:
0.3 s beeps at 0.33 Hz - In radar or test scan, signal strength
indication unavailable until it's completed.
0.01 s beeps at 0.33 Hz - No connection.
0.01 s beeps at 1 Hz - Connection in progress.
0.01 s beeps at 3.3 - 50 Hz - Connected with valid signal, faster
beeping for stronger signal.
0.4 s beeps at 2 Hz - Signal excessively strong.
Note: Beeping turns off 15 minutes after startup or settings
change regardless of setting.
Use a syncmaster
The SyncMaster is a unit that allows several links to operate on the same
channel at the same time at a site. Refer to Repeatit’s SyncMaster white
paper for more information.
