Max Tx rate master
Maximum data rate from the master unit. Note! The value does
not always reflect the actual maximum capacity. The capacity
could be limited by other settings like channel bandwidth and
division of time between master/client. A low limit can destroy
for the built in speed test.
Max Tx rate client
Maximum data rate from the client unit. Note! The value does
not always reflect the actual maximum capacity. The capacity
could be limited by other settings like channel bandwidth and
division of time between master/client. A low limit can skew the
built in speed test.
CAC policy
This will allow you to control the DFS CAC (Channel Availability
Check, i.e. the amount of time to listen for radar before using a
channel) policy. Selecting “Regulatory” will follow the rules ac-
cording to the selected regulatory domain, this is the recommended
setting. Selecting “Custom” will allow you to enter a custom DFS
CAC time.
Note
Note that in Europe, according to the ETSI EN 301 893
regulation, there is a 10 minute CAC time on the 5.6GHz band
due to weather radars.
Enable reordering
Re-order packets via buffering to reduce the number of out-of-
order packets. Enabling this option will increase latency when
out-of-order packets occur.
Always buffer
Buffer all packets, not only those that need re-ordering.
Increases average latency, but reduces variations in latency
(jitter).
Reordering level
O
