Page 4(17)
Connect the PoE adaptor to a power socket. The SU is connected to the PoE adaptor’s
P+Data out
socket
through the straight Ethernet cable that comes with the SU. The PC shall then be connected to the
Data in
socket on the PoE adaptor via the Ethernet cable that is provided in the box.
Unit shall be grounded by connecting mounting bracket to proper earth grounding
Indoor units:
Connect the power supply to the unit and connect the PC cable to any of the two RJ45 sockets.
Computer settings
The client computer needs a network card that is properly installed. The network card normally use DHCP
configuration, which means that an IP address automatically is assigned when the computer is connected to
the SU.
Client terminal settings
When the SU is delivered, its IP address is set to 192.168.50.1. The built in DHCP server delivers IP-
addresses in the range 192.168.50.2-100.
User interface
The subscriber unit is configured in a browser window. Start your browser and type the following line in
the address field:
http://192.168.50.1
Press
Enter
. A login window is shown. The default login settings are:
User name
:
admin
Password
: public
User name:
user
Password
: public
Type the user name and the password in the fields provided and press OK. In the browser window, all
relevant SU settings can be monitored.
The WEB interface has 8 different tabs, the default tab that is shown is the status tab. To switch tab left
click with the mouse over the desired tab.
The two different usernames gives access to different levels of configuration:
Function
Admin
User
Status
X
X
Basic
X
Security
X
Network
X
X
VirtualServer
X
X
QoS
X
Admin
X
Maintenance
X
X
Tools
X
General wireless Installation
This guide can be used if the following two conditions hold:
