Page 14(17)
There is no meaning to put all traffic in the Voice queue to get better priority. The settings for each queue
are optimized for the type of traffic voice and video.
Admin tab
The Admin tabs parameters are for the more advanced user or the ISP. You can configure bandwidth limits
and an extra mgmt IP-address. You can also change some radio parameters
.
Method:
Here you can see the CPEs current mode.
Rx BW Limit:
This is the maximum bandwidth for incoming traffic on the
wireless interface. 0 means “No Limit”
Tx BW Limit:
This is the maximum bandwidth for outgoing traffic on the
wireless interface. 0 means “No Limit”
MGMT TCP/IP settings
VLAN:
This is the VLAN that the mgmt IP-address is listening on.
MGMT IP address:
This is the mgmt IP-address.
Netmask:
This is the mgmt IPs netmask
Gateway:
This is the gateway used for the mgmt IP.
