Page 13(17)
To edit an existing press the edit button next to it and change the parameters. Then press “Save”. To
activate the changes press “Apply”
To delete a rule press “Delete” next to the rule. Then press “Save”. To activate the changes press “Apply”.
QoS tab
In the QoS tab you can configure priority rules. The CPE uses a standard called WMM to priority different
types of traffic. It has four different queues with different settings. You can configure traffic from a specific
IP-address or MAC address to be put in a specific queue. For instance if you have a VoIP phone you can
specify that the traffic from the phone should be put into the Voice queue.
Enabled:
A rule can be either enabled or disabled, if disabled it will be
in the list but it will not be activated.
Name:
You can give the rule a name to easier remember what it does.
IP-Addr:
The IP-address of the unit that will have its traffic
sorted according to this rule.
MAC-Addr:
The MAC-address of the unit that will have its traffic sorted
according to this rule.
DSCP:
This parameter controls which queue the traffic specified in
this rule will use. This corresponds with the four different
queues, Voice, Video, BacKground and BestEffort.
When rule is defined press “Save”, to activate the rules press
”Apply”.
