32
Full Screen
: Click to select the whole screen as the motion detection area.
Clear Area
: Click to clear all the motion detection area you configured.
OK
: Click to save the motion detection area configured.
Cancel
: Cancel the settings you just made.
Tips
:
1.
Click mouse to select and click again to de-select.
2.
Click and drag the left-click button on the mouse to select or de-select certain area you
want.
Click
OK
on the Alarm page to save and enable settings.
4.5 Device Settings > System
Under this menu, you may check the system information of the device, configure the time
settings, upgrade the firmware of the camera and reboot it.
4.5.1 System > General
Under
General
, users can set up the Video Standard and time settings etc.
