7
End Clamp (J)
4
Holds end modules in
place
via
compression
and
acts as an end stop.
NOTE:
May look
different
than
pictured. Specific
end
clamps
required based on
panel thickness.
Nut (Small) (K)
18
Used to tighten T-
bolts and cap head
bolts to components.
Washer (Large)
(L)
4
Normal flat washer
used
to
prevent
surface marring on
components from the
use of the Lock
Washers.
Nut (Large) (M)
8
Used to tighten U-
bolts to L-channel.
Table 1
