10
Attach Support Arm to bottom L-Brackets
A. Flush Support Arm (D) to L-Bracket (C) and align the holes.
B. Place washer on Support Arm (D) surface and align holes.
C. Feed a Cap Head Bolt (G) through Support Arm (D), and the L-Bracket (C).
D. Fasten it with small Nuts (K).
D. The orientation should be close to
Figure 3
.
E. Repeat for the other side.
Figure 3
Note:
The reason for this is that depending on the angle that the T-Slotted brackets are
fastened to the top L-Channel, you may need to adjust the bottom L-Channel so that it will
be flush against the pole.
D
G
I
H
K
