889-1429-00 CPS-TS2E Operation Manual Rev Apr 2021 Page
14
Upon entering this page, figure 17, the user is able to adjust how the
power supply logs/records measured data to the uSD card, define the
SAG-Swell magnitudes’, and set the real time clock. The parameter main
branch provides the ability to re-instate factory default parameter values,
save any newly entered parameters into flash memory becoming the new
default values.
Navigating and editing parameters is accomplished in the same manner
as described and depicted earlier.
Figure 17 – Parameter Page after entry
6.
Networking Page, page 5.
The Networking page, page 5, offers the means for configuring the LAN
connectivity of a power supply. For example, common networking
parameters such as IP address, IP mask, and Gateway are accessible for
alteration, figure 18.
Figure 18 – Networking Page before and after entry
Additionally, the TCP/IP or UDP server hosted by a power supply is
selectable and Ethernet ports are defined, figure 19.
Figure 19 – Navigating to the TCP or UDP Server branch.
