889-1429-00 CPS-TS2E Operation Manual Rev Apr 2021 Page
12
4.
Alert (or Alarm) Setpoints Page, Page 3.
By pressing the UP PB from the previous page (Detail Page), Alert Levels
configuration page appears. See Figure 11. Like the previous page, the page is
organized as a tree with branches and leaves. Each branch contains the high
and low voltage setpoints and the high current setpoint for each DC and AC
outputs as well as the AC line input. Each leaf will contain the user editable
value of that setpoint.
Figure 11 – Alert Setpoint Page
Entering and subsequent navigating through this tree is accomplished in the
same way as described previously with the Device Detail Page, figure 12.
Figure 12 – Exploring the main branches
And as demonstrated previously in the Device Detail Page, selecting a sub-
branch to explore is accomplished by pressing the Enter PB and then using the
Up and Down PBs to further navigate the selected sub branch as the up and
down arrows now indicate, figure 13.
Figure 13 – Navigating the sub branches
