889-1429-00 CPS-TS2E Operation Manual Rev Apr 2021 Page
13
To edit a particular leaf value of a sub branch, navigate to the desired branch
(highlighted), then momentarily depress the Enter PB. The first character of
the value is highlighted. See figure 14.
Figure 14 – Editing a Setpoint
The Up or Down PBs will move to any position in the leaf’s value. The Enter PB
selects that position for change. When a character in a particular position is
selected for change by momentarily pressing the Enter PB, pressing either the
UP or Down PBs will now scroll through the allowable values for that
character in that position. Once the desired value is found, select the choice by
again pressing the Enter PB. This changes the character and moves the cursor
to the next available character. The Up and Down PBs will then return to their
previous function of moving to different positions in the value.
To exit the value edit mode and save the new value, use the UP and Down PBs
to move to the asterisk (“*”) and then press the Enter PB. The UP and Down
PBs are now free to explore the other sub-branches and their respective leaves
can be navigated to as previously describe, Figure 15.
Figure 15 – Asterisk highlighted; ready to update and store new value
and exiting edit mode.
5.
Parameters Page, page 4.
Page 4 provides the means to change how the power supply logs
measured data; see figure 16.
Figure 16 – Parameter Page prior to entry
Enter PB
