Owner‘s Manual Crimping Machine CM 25-3.4
Rev.: 2020-06-24
3 / 20
1. Preface
This owner’s manual is designed to get to know the crimping machine CM 25-3.4 and to properly operate the unit.
The owner’s manual contains important instructions to operate the crimping machine safely and efficiently. Follow
the instructions carefully to avoid risks and injuries, decrease repair costs, downtime and increase the life of the
machine. The pneumatic crimping machine CM 25-3.4 is manufactured by using the latest technology and the
generally accepted safety regulations. The machine may only be used in proper working condition, as well as with
safety and risk awareness. Unauthorized modifications to the machine, including the safety device, will exclude the
manufacturer from any liability.
Never process any connected electrical connections; they are subject to dangerous voltage!
Attention
2. Intended Use
The Crimping Machine CM 25-3.4 is used for crimping turned contacts with the specified cross sections in the
designated crimping units and are constructed in such a way. The machine is also used for the crimping of insulated
and non-insulated ferrules as well, with the proper crimping insert.
3. Technical Data
3.1. General
Type:
CM
25-3.4
W x H x D:
230 x 480 x 340 mm
Weight:
30
kg
Crimp Force:
25 kN (2,5 t) at 5 - 6 bar
Crimp
Time:
<
1
s
Continues Sound Pressure Level:
< 70 dB (A)
Pneumatic Pressure needed:
0,75 l / Work Stroke at 6 bar Operating Pressure
Operating Pressure:
5 - 6 bar (compressed dry air, oiled and filtered)
Working Temperature:
-10 ... +55 °C, rel. humidity < 85 %, not condensed
Operating Temperature:
-10 ... +60 °C
Storage Temperature:
-20 ... +70 °C
Battery (Crimp Unit):
CR 2025
Model
Item No.
Capacity
8.72-3
636 0723 3 01
0,08–2,5 mm²
8.72-6 (according to M22520 / 7-01)
636 0726 3 0
0,08–2,5 mm²
8.73-3
636 0733 3 01
0,03–0,5 mm²
8.73-6 (according to M22520 / 2-01)
636 0736 3 0
0,03–0,5 mm²
8.75-3
636 0753 3 01
0,14–6,0 mm²
8.75-6 (according to M22520 / 1-01)
636 0756 3 0
0,14–6,0 mm²
8.76-3
636 0763 3 01
1,50–10,0 mm²
Model
Item No.
Capacity
Ferrules (square)
636 084 3 0
0,08–10,0 mm²
Ferrules (hexagon-shaped)
636 086 3 0
0,08–6,0mm²