3
Assembly of the toothed belt
1x basic frame
1x toothed belt 822 mm
Tip the basic frame back (do not put it on its head).
Relieve belt tensioners entirely.
Install the toothed belt as shown.
Observe that the distances set in the previous step are not
changed. The bottom plate and Y-plate still need to be pre-
cisely in parallel.
Assembly of the side parts
1x side part left
1x side part right
10x cylinder head screw M4x10
Push the side parts onto the basic frame on the sides and at-
tach them with the screws.
The side part with the openings for USB connection and mem-
ory card is installed on the right side.
The openings of the side parts must be cleanly inserted into the
tabs at the bottom and X plate.
Note: The side parts are sensitive to scratching!
