Renkforce 1312695, Operating Instructions Manual

Page: 105 / 248

105
u Speaker/Handset Volume Settings
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
“ (2) or „ “ (12) to select the submenu for the setting of the mobile unit
(„HS Settings “) and push the left function button (1) briefly for confirmation.
• Use the buttons „ “ (2) or „ “ (12) to select the submenu for the audio settings and push the left
function button (1) briefly for confirmation.
• Use the buttons „ “ (2) or „ “ (12) to choose between the settings of the speaker volume (speaker
on the rear of the mobile unit for the hands free function) or the setting of the handset volume. Push the
left function button (1) briefly for confirmation.
• Set the desired volume (5 levels) with the buttons „ “ (2) or „ “ (12).
• Save the setting with the left function button (1); a brief confirmation sound is emitted.
u
Dial Tone (Internal/External) Settings
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
“ (2) or „ “ (12) to select the submenu for the setting of the mobile unit
(„HS Settings “) and push the left function button (1) briefly for confirmation.
• Use the buttons „ “ (2) or „ “ (12) to select the submenu for the call sound settings and push the left
function button (1) briefly for confirmation.
• Use the buttons „ “ (2) or „ “ (12) to choose between the setting of the internal or external call
sound. Push the left function button (1) briefly for confirmation.
The internal call sound is used if the call comes in from another mobile unit. The external call
sound is used when a call comes in through the phone grid.
• Choose between the melody and volume settings with the buttons „ “ (2) or „ “ (12). Push the left
function button (1) briefly for confirmation.
• Then you can use the buttons „ “ (2) or „ “ (12) to set the melody (10 different ones are available) or
the volume (5 levels & off).
If you set the volume to „off“, a text is displayed for a call.
• Save the setting with the left function button (1); a brief confirmation sound is emitted.