13
Clocked output option
(MHz)
40 to 50
<40
analogue
Maximum
cable length (m)
25
50
50
General specifications
Power supply
5 V ±10%
Readhead only <100 mA
T100x with Ti0000 <100 mA
T100x with Ti0004 – Ti20KD or TD4000 – TD0040 <200 mA
NOTE: Current consumption figures refer to
unterminated systems.
For digital outputs a further 25 mA per channel pair
(eg A+, A-) will be drawn when terminated with 120R
.
For analogue outputs a further 20 mA in total will be
drawn when terminated with 120R
.
Power from a 5 V dc supply complying with the
requirements for SELV of standard IEC BS EN 60950-1.
Ripple
200 mVpp
maximum
@ frequency up to 500 kHz
Temperature (system)
Storage
-20 °C to +70 °C
Operating
0 °C to +70 °C
(UHV readhead)
Bakeout
+120 °C
Sealing (readhead)
IP40
(interface)
IP20
Acceleration (readhead)
Operating
500 m/s
2
, 3 axes
Shock (system)
Operating
500
m/s
2
, 11 ms, ½ sine, 3 axes
Vibration (system)
Operating
100
m/s
2
, 55 Hz to 2000 Hz, 3 axes
Mass
Readhead 10 g
Interface 100 g
Cable
26 g/m
UHV cable 14 g/m
Readhead cable (standard)
Double shielded, outside diameter 4.25 ±0.25 mm
Flex life >20 x 10
6
cycles at 20 mm bend radius
UL recognised component
(UHV)
Tin coated braided single screen, FEP core insulation
Maximum cable length
Readhead to interface
10 m
Interface to controller
Renishaw encoder systems have been designed to the relevant EMC standards,
but must be correctly integrated to achieve EMC compliance. In particular,
attention to shielding arrangements is essential.
Scale technical specifications
Scale type
RGSZ20-S: High stability steel tape, gold plated with polymer
protection and self-adhesive backing tape.
RGSZ20-T: High stability steel tape, gold plated with polymer
protection. No backing tape.
RGSZ20-P: High stability steel tape, gold plated with tough
polyester coating for use in applications requiring immunity
against harsh solvents.
Fitted with a self-adhesive backing.
NOTE: RGSN variants of above scales are manufactured
without reference marks.
Scale period
20 µm
Linearity
RGSZ20-S and RGSZ20-T: 3 µm/m
RGSZ20-P: ±5 µm/m
Scale length
100 mm to 50 m in 50 mm increments (>50 m by special order)
Form
0.2 mm x 6 mm (H x W) includes adhesive
Reference mark
Customer selected
IN-TRAC
auto phase reference mark
repeatable to unit of resolution throughout specified temperature
and speed range.
Reference marks at 50 mm spacing
Installation temperature
15 °C to 35 °C
TONiC RGSZ installation guide