360°
1-9
MA4 90° ADAPTOR
The MA4 right angle adaptor is
attached to the OMP and enables
the probe to be mounted at 90°
to the machine spindle centre line
This extra versatility allows
the probe to reach otherwise
inaccessible workpiece features.
The MA4 screws into the OMP,
and is tightened with the
C spanner. The C spanner is
also used to tighten the LP2
probe in its mounting.
After the MA4 is tightened in
the OMP, the three screws
A
can be slackened. The MA4
can then be rotated and set in
any position through 360°.
Finally retighten the three screws
A
.
Extension bars up to 150 mm long
can be used between the MA4 and
probe.
See screw torque values page 1-11
C spanner
MA4
2,5 mm AF
A
LTO2
LP2
