Renishaw InfiniAM Spectral, User Manual

Page: 60 / 66

InfiniAM Spectral
54
Operation
(1) Navicube (Figure 50) – shows the current orientation of the volume in the multiplanar view. The
direction of the orange arrow identifies the front of the build plate. Snap to pre-determined views by
selecting the edges, corners and planes of the navicube. Alternatively, the navicube can be selected
with the left mouse button and dragged to change the orientation.
(2) Reset camera button (Figure 51) – this resets the camera to the default viewing position.
(3) Screenshot button (Figure 52) – selecting this opens the 'Save screenshot' dialog. This enables
capturing of a screenshot of the currently active pane in either *.png, *.jpg or *.bmp format. If the
currently active pane is maximised, the view saved will be of the maximised pane.
(4) Toggle build plate button (Figure 53) – selecting this changes whether or not the build plate is
displayed in the multiplanar view.
Figure 50 Navicube
Figure 51 Reset camera button
Figure 52 Screenshot button
Figure 53 Toggle build plate button