Renishaw InfiniAM Spectral, User Manual

Page: 56 / 66

InfiniAM Spectral
50
Operation
(1) Displays the position of the cut plane in mm (Figure 37).
(2) Show/Hide in multiplanar view button (Figure 38) – selecting this enables a choice of whether to
Show or Hide the cut plane in the multiplanar view.
(3) Flip cut plane button (Figure 39) – when in 3D mode, this changes whether the region of the
volume in front of or behind the cut plane is displayed. It also flips which side of the cut plane data is
shown in the multiplanar view.
(4) Toggle 2D/3D button (Figure 40) – selecting this enables a 2D or 3D view of the build to be
displayed in the selected pane. Toggle between 2D or 3D data as preferred. The navicube is displayed
when the 3D view is selected.
Figure 37 Displays the position of the cut plane
Figure 38 Show/Hide in multiplanar view button
Figure 39 Flip cut plane button
Figure 40 Toggle 2D/3D view button