25
The rear LED can either be pulsing green or off. When green, it indicates that the Equator machine is
connected and communicating to the controller.
The other two LEDs indicate the status of the drive struts; they are green if the servos are engaged,
orange if the system is powered and ready to engage, and red if there is an error preventing servos
from engaging.
The image above shows some of the possible LED states.
A-5504-0070 machines
NOTE: The following information is only applicable to A-5504-0070 machines, identifiable by
LED lights on the floating platform.
Left LED
Machine State
Meaning
Grey - Off
No power
Solid red
Machine disengaged - fault
state
Red flashing
No communications
Solid amber
Machine disengaged - no
fault state*
Amber flashing
Hold mode engaged
Solid green
Machine engaged
Right LED
Probe State
Meaning
Grey - Off
No power
Solid red
Probe fault / over range
Red flashing
No probe present
Solid amber
N/A*
Solid green
Probe ready
*If both LEDs are solid amber, the machine is initialising.
7.4