Step 10.
To remove clamp:
Model with “Lock Open-Lock Closed” feature: After plate is fully supported
and in a stable position, relax lifting force, keeping hands clear, move lock
handle to “Lock Open” position—lift clamp from plate. Refer to Illustration A,
Step 5.
Model with “Lock Open Only” feature: After plate is fully supported and at rest
in a stable position, relax lifting force, move gripping cam to retracted position
by manually operating shackle—insert lock stop pin—lift clamp from plate.
Refer to Illustration B, Step 5.
Step 11.
Inspect clamp. Remove from service if in need of repair.
WARNING: In the event the stenciling is worn and not legible or the tag
containing the model, capacity or other pertinent information is miss-
ing—do not use clamp until it has been properly labeled.
Maintenance R/RO
Inspection Kits are available at no charge upon request from the distributor or
RENFROE.
Kit contains:
