Renfert 276100 0000, Manual, Page: 356 / 360

EMV
2.2 Interference Emission and Immunity Levels
2.2.1 Maintaining the Interference Emission Level
Interference Measurement Compliance
Conducted interference (interference voltage)
CISP11
Class A
Limit values are complied with.
Radiated interference variable (noise field intensity)
CISP11
Class A
Limit values are complied with.
Distortion due to harmonics
IEC 61000-3-2
Class A
Limit values are complied with.
Voltage fluctuations and flicker
IEC 61000-3-3
Satisfied
2.2.2 Maintaining the Interference Immunity Level
Interference Immunity Test Standard / Test Level Match Level
Static electricity discharge IEC 61000-4-2
Air discharge15 kV maximum
Contact discharge: 8 kV maxi-
mum
15 kV
8 kV
High-frequency electromagnetic fields
80 MHz - 2.7 GHz
IEC 61000-4-3
10 V/m 10 V/m
High-frequency electromagnetic fields
(near field)
380 MHz - 5.8 GHz
IEC 61000-4-3
28 V/m maximum No interference
Electrical fast transients (burst) IEC 61000-4-4
2 kV 2 kV
Surge voltages (surge) IEC 61000-4-5
1 kV 1 kV
Conducted disturbances
150 kHz - 80 MHz / ISM + AR
IEC 61000-4-6
3 V / 6 V 3 V / 6 V
Magnetic fields with energy frequency
50 / 60 Hz
IEC 61000-4-8
30 A/m 30 A/m
Mains voltage dips and short interruptions IEC 61000-4-11
Test voltage / exposure time
70 % / 0.5s
0 % / 0.02s
0 % / 0.01s
0 % / 5s
The response to the mains volt-
age dips and short interruptions
is device specific.
The behavior of the product /
equipment in these scenarios is
specified in the operating instruc -
tions for the product.
2.3 Unknown EMC Environment
Avoid operation in the vicinity of stationary transmitters such as base stations of radio telephones, land
mobile radios, amateur radio stations, AM and FM broadcasting and television transmitters.
When operating in this kind of environment, pay attention to the behavior of the product / equipment.
Consider changing the location if there are any unusual functional limitations or reduced performance
characteristics.
The field strength measured at the site should not exceed the above referenced compliance levels.
Subject to change
- 4 -