33
1.800.627.4499
PA-Series
ERV
2.2.13 Screw Side Panels to Core Stacks and Filter Racks
Check that Side Panels form a flat plane.
Adjust panels in and out with a rubber mallet as needed.
Fasten all the Panels to the Core Stacks by screwing through the S-Slips, Figure 2.2.23.
Install screws through Filter Rack Flanges or S-Slips on Core Stacks to connect all pieces
together. Use #12 self-drilling screws. Drill 1/8" pilot holes.
Caulk all accessible joints to prevent air leakage between compartments.
www.renewaire.com (800) 627- 4499
FIGURE 2.2.23 LOCATIONS FOR SCREWS
INSTALLATION