23
1.800.627.4499
PA-Series
ERV
INSTALLATION
Place 2
nd
ENERGY RECOVERY CORE on BASE. Figure 2.2.4
Slide one flange of core into Core Center Spacer.
Check locations of the second stack. Refer to Figure 2.2.2.
www.renewaire.com (800) 627- 4499
FIGURE 2.2.4 PLACE SECOND ENERGY RECOVERY CORE
THREE-STACK UNITS ONLY:
Place 2nd Core Center Spacer.
Place 3rd Core.
Check location of the stacks.
Complete the Core Stacks.
Double check stack placement by measuring.
2.2.4 Install End Panels
Place S-Slips on the RenewAire Core Flanges at both ends of the Array, so the End Panels can
be installed, Figure 2.2.5.
Install End Panels, Figure 2.2.6.
Bottom edges of End Panels go inside the Base.
Insert long edges of End Panels into the S-Slip on each Core Stack.
Pull End Panels out at the bottom, tight to the Base.
Fasten End Panels by screwing through Base. Use (6) #12 self-drilling screws at each end.
