Smart Analog IC101
Smart Analog Easy Starter 101 Tutorial (RL78/L13)
R21AN0011EJ0100 Rev.1.00
Page 3 of 18
Nov 01, 2014
2. Board Soldering
To connect the RSK CPU board and the TSA-OP-IC101 board, the user must attach pin sockets or headers to the
extension board interface (herein referred to as “application header”). This section explains the soldering locations on
both boards.
RSK CPU Board
Solder pin sockets to the RSK CPU board application headers (JA1, JA2, JA5, and JA6). Solder 26 pins (2 x 13)
to JA1 and JA2, and 24 pins (2 x 12) to JA5 and JA6, facing upward. Make sure the pin sockets are mounted
perpendicular to the board.
Figure 2-1
Pin Socket Mounting on RSK CPU Board
JA1
JA5
JA2
JA6
JA1 (facing upward)
JA5 (facing upward)
JA2 (facing upward)
JA6 (facing upward)
Always mount
socket perpendicular
to the board.
