Smart Analog IC101
Smart Analog Easy Starter 101 Tutorial (RL78/L13)
R21AN0011EJ0100 Rev.1.00
Page 14 of 18
Nov 01, 2014
Next, select the Setting file that you added in the
Register
combo box in the Start window. Also select the RSK CPU
and TSA-OP-IC101 boards in the Start window’s
Target Board
combo box, and click
Select
. When the target boards
are successfully connected, the Main window is displayed.
Register: RSK Option Board Thermistor 2014/08/08 18:00:57
Target Board: R0K5010W TSA-OP-IC101 (RL78/L13 + Smart Analog IC101)
Figure 7-6 Setting File Selection
Refer to the
A/D Conversion Control
items in the Main window frame and the Chip Config window (click
Chip
Config
under
Smart Analog
) to confirm that the A/D conversion control settings for the on-board thermistor sampling
and the TSA-OP-IC101 board parameters have been restored.
Figure 7-7
Restored Settings Confirmation
Main window is displayed
A/D Conversion Control Settings
- Enable only CH2
- Conversion frequency = 50 ms
- Conversion times = Continuous
SAIC101 Parameter Settings
- Set CH2
Input Mode = Differential Input (differential amp)
GSET1= 1, GSET2 = 8
Oversampling Ratio = 256
AIN2OFT = 2
・
SBIAS = 1.2V
