Smart Analog IC101
Smart Analog Easy Starter 101 Tutorial (RL78/L13)
R21AN0011EJ0100 Rev.1.00
Page 13 of 18
Nov 01, 2014
7.3
Read Setting File
Easy Starter 101 allows the user to reload the stored settings by reading the Setting file
Note
stored in the register set
folder. The default register set folder is specified as the
setting
folder located in the SA_Easy_Starter_101_Ver2.1
folder. To change the register set folder, open the Option Dialog in the Start window and change the folder path in the
Register Set Folder Setting
tab.
Note: The Setting file stores information concerning the state of the designed AFE circuit and can be created by the user.
Figure 7-4
Register Set Folder
The TSA-OP-IC101 board is equipped with a thermistor to be used as a sensor to confirm operations. The sensor’s
Setting file required to run the thermistor can be downloaded from the Renesas Electronics website. Store the
downloaded file in the register set folder.
The Setting file will show up in the
Register
combo box when Easy Starter 101 is started up. If you add the Setting file
while Easy Starter 101 is already running, restart the program to ensure the file is correctly displayed.
Thermistor Setting file download URL:
http://www.renesas.com/smart_analog/down_load_101
File name: Thermistor_RL78L13_RSK_on_TSA-OP-IC101.zip
Figure 7-5
Setting File Stored in Register Set Folder
