RL78/I1A
Chapter 8 Applilet EZ for HCD Controller
8.3 Variable Dimmer Program
This program sets the duty value for each channel according to a drawing pattern
data.
Make sure that you have set all the settings as explained in the
8.1 General
Settings
section.
<1>
Save the new Applilet EZ project (.hcd file). Select the
File
menu, then click on
Save As…
or simply click on the “
Save
” button, and input “
variable.hcd
” for
example. To finish click
Save
.
<2>
Applilet EZ for HCD Controller Save As Window
Figure 26:
We now have a new Applilet EZ project file and we will change the dimmer
program to Variable.
<3>
Applilet EZ for HCD Controller Dimmer Program Selection (Variable)
Figure 27:
Click on the
“Edit”
button under “Variable” and the “Dimmer Programming”
window will open. Enable the
“Cyclic”
check box. Click the “
Ch.1
“
button to
select this channel for modification. Select the line mode as shown below. This
will allow you to draw the PWM duty cycle versus time by using your mouse
pointer.
<4>
R01UH0363EJ0100 Rev. 1.00
27
March 23, 2012
