RL78/I1A
Chapter 8 Applilet EZ for HCD Controller
Make sure that you have installed the selected compiler correctly to your host PC
before building the project.
Note
It is also possible to configure the output project folders by clicking on the
Setting
menu and then selecting
Project Folder
.
<5>
These locations will specify the output paths of the generated files. Enter in your
desired destination but please keep in mind that Applilet EZ will then create
subdirectories under this folder for each Applilet EZ project. Click
OK
.
Applilet EZ for HCD Controller Project Folder
Figure 19:
8.2 Fix Dimmer Program
This program sets a fixed duty value for each of the 3 LED channels. Make sure
that all settings explained previously are still correctly set before proceeding with
the following steps.
Make sure “
Fix Duty
” is still selected as the dimmer program.
<1>
Input “
128
” to all the channels so they are not too bright.
<2>
Applilet EZ for HCD Controller Fix Duty Settings
Figure 20:
We can then save the new Applilet EZ project (.hcd file). Select the
File
menu,
then click on
Save As…
or simply click on the “
Save
” button, and input “
fix.hcd
”
for example. To finish click
Save
.
<3>
R01UH0363EJ0100 Rev. 1.00
24
March 23, 2012
