RL78/I1A
Chapter 8 Applilet EZ for HCD Controller
Applilet EZ for HCD Controller Save As Window
Figure 21:
Please make sure to set the SW2 dip switch to the flash programming mode.
Then plug the power cable to the
RL78/I1A DC/DC LED Control Evaluation
Board
, and plug the USB connector. Click the “
All P.
“
button.
<4>
Applilet EZ for HCD Controller All Program Button
Figure 22:
You will be informed about the progress of the compilation.
<5>
Applilet EZ for HCD Controller Compilation Progress
Figure 23:
R01UH0363EJ0100 Rev. 1.00
25
March 23, 2012
