RL78/G23
ELCL Multiple Parameter Monitoring Function
R01AN5615EJ0200 Rev.2.00
Page 26 of 42
Mar.24.22
5.2.1 Clocks
Set the clock used in the sample code.
5.2.2 System
Set the on-chip debug of the sample code.
"Control of on-chip debug operation" and "Security ID authentication failure setting" affect "On-chip
debugging is enabled" in "Table 4-4 Option Byte Settings". Note that changing the settings.
5.2.3 r_bsp
Set the startup of the sample code.
5.2.4 Config_LVD0
Set the power management of the sample code.
Affects "Setting of LVD0" in "Table 4-4 Option Byte Settings". Note that changing the settings.
5.2.5 Config_INTC
Set the interrupt settings of the sample code.
The sample code sets the external maskable interrupt (INTP0); delete it if you do not use INTP0.
5.2.6 Config_TAU0_0
、
Config_TAU0_1
、
Config_TAU0_2
、
Config_TAU0_3
Set the TAU00, TAU01, TAU02, and TAU03 of the sample code.
In the sample code, it is used as an "interval timer" and the interval time is changed for each channel.
Changing the interval time will change the interval at which the LED blinks.
TAU00, TAU01, TAU02, TAU03, and individual interrupts are not used.
5.2.7 Config_TAU0_7
Set the TAU07 of the sample code.
In the sample code, it is used as a chattering countermeasure for INTP0; delete it if you do not use INTP0
or do not need the chattering countermeasure.
