10
By checking the Enable automatic re-execution from interrupt break check box, the state
transition when an interrupt occurs can be pseudo-emulated. Note that the timing of the state
transition from the interrupt occurrence is different from that of the actual MCU. The emulator
processing flow and the timing of the termination of the user program is shown in figure 3.2.
Disable
LSON = 1
(enters the subactive mode)
Enable
LSON = 0 and re-execution
is enabled
LSON = 1 or re-execution
is disabled
Figure 3.2 Emulator Processing Flow When an Interrupt Occurs in the Watch Mode or the
Software Standby Mode