manualshive.com logo in svg

Renault Premium DXi 11, Service Manual

Share
Download
Renault Premium DXi 11 Service Manual Download Page 97

B2-55   

 Presentation

Cab air distribution control knob

The control distributes the air between the
various outlet ports according to the position
chosen.
Combined with the temperature variator and
the ventilation control, it assures optimized
temperature according to the positioning of the
outlets.

Position 1

Air directed upwards (to the dashboard air vents) and gentle flow downwards
 (to the footwell).

Position 2

Air directed upwards (to the dashboard air vents) and downwards (to the footwell).

Position 3

Air directed downwards (to the footwell) and gentle flow upwards (to the windscreen).

Position 4

Air directed downwards (to the footwell) and gentle flow upwards (to the windscreen and
side windows).

Position 5

Air directed upwards only (to the windscreen and side windows).

When the side and central air vents are open, the air flow is distributed between the different
ports selected for each control position.

Summary of Contents for Premium DXi 11

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands