Renault Premium DXi 11, Service Manual

Page: 189 / 400

C4-45
Driving
Vehicle with Optidriver 2 gearbox
1– Keep the vehicle stationary by holding it
on the brakes.
2– Press switch (A2), the switch warning
light comes on.
3– Release the brake pedal; the vehicle is
held automatically on the brakes for 1
second
. Warning pictogram (G20) ap-
pears on the information display (L) and a
buzzer sounds for as long as the vehicle is
held automatically on the brakes.
4– Move away while accelerating. The
brakes are released automatically when
the engine torque is sufficient or a short
instant later when the brake pedal is re-
leased.
5– Press switch (A2) again to disable the feature; the switch warning light goes out.
The feature is automatically disabled if the road speed exceeds 30 km/h or if the ignition is
switched off with the ignition key.
WHEN THE "HILL-START ASSIST" CONTROL IS ACTIVATED (SWITCH (A2)), THE
BRAKES ARE KEPT APPLIED FOR 1 SECOND AFTER THE BRAKE PEDAL IS RELEASED.
IF NO ACTION IS TAKEN BEFORE THIS PERIOD ELAPSES (ACCELERATION, BRAKE
PEDAL APPLIED AGAIN), THE BRAKES WILL NO LONGER BE KEPT APPLIED AND THE
VEHICLE WILL START TO ROLL BACKWARDS.
Once selected with switch (A2), the feature will be active whenever the vehicle
stops as long as:
– it is not disabled by pressing switch (A2) again;
– the ignition is not switched off with the ignition key;
– the road speed is below 30 km/h.