manualshive.com logo in svg

Renault Premium DXi 11, Service Manual

Share
Download
Renault Premium DXi 11 Service Manual Download Page 119

B3-1   

 Presentation

RESENTATION

Safety

Seat belts

Inertia reel seat belts

Slowly unwind the strap so as to be able to
engage tongue (1) in buckle (2). If the strap
jams, pull it back a little then continue unwind-
ing.

Unlocking

Press button (3) on buckle (4); the belt is
returned by the inertia reel. Accompany tongue
(1) with your hand to facilitate this operation.

Depending on your vehicle's equipment

A buzzer will inform you when you have to
attach your seat belt.

To ensure your own safety, wear your
seat belt whenever you take the road.

Before moving off: Firstly regulate

your driving position, then adjust
your seat belt correctly.

BABIES OR CHILDREN SHOULD IN NO CIRCUMSTANCE BE CARRIED ON THE KNEES
OF OCCUPANTS OF THE VEHICLE.
NEVER USE ONE SEAT BELT TO ATTACH TWO PERSONS.

NEVER PASS THE SHOULDER STRAP UNDER YOUR ARM, OR BEHIND YOUR BACK.

Summary of Contents for Premium DXi 11

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands