manualshive.com logo in svg

Renault Premium DXi 11, Service Manual

Share
Download
Renault Premium DXi 11 Service Manual Download Page 29

B1-15   

 Presentation

Disabling of the alarm

With the vehicle powered up, press button (6)
on the remote control:

– The vehicle is powered up (only for vehi-

cles equipped with an electrical master
switch).

– The cab doors unlock.
– The red LED (4) on the control box (3)

goes out.

In the event of remote control malfunction,
you can disable the alarm by turning the
ignition key to the "ignition" position (3).
After that, it is necessary to re-synchronize
the remote control with the alarm by activat-
ing and de-activating the system once more.

If there is an attempt at theft of the vehicle or its
freight, the siren sounds after the alarm has
been disabled. It is possible to find out what
kind of intrusion has been perpetuated by
means of the message and the pictogram (G36)
shown on the information display.

The message and the pictogram are erased when the ignition is switched on, with the ignition
key in position (3).

Summary of Contents for Premium DXi 11

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands