REMKO RVS 130 DC, Operating And Installation Instructions

Page: 16 / 44

Calling up operating parameters
To display the operating parameters, briefly press the key on the start screen. Now the sensor values and other
operating conditions can be called up here. The and keys can be used to navigate between the different
operating parameters.
The meaning of the individual parameters can be found in the list below.
ID Designation
U01 Water inlet temperature
U02 Water outlet temperature
U03 Suction gas temperature
U04 Heat gas temperature
U05 Ambient temperature
U06 Finned heat exchanger temp.
U07 Low pressure
U08 High pressure
U09 Throttle setting
ID Designation
U10 Current compressor frequency
U11 Required compressor frequency
U12 Suction gas overheating
U13 Heat gas overheating
U14 Current fan speed
U15 Not used
U16 Not used
U17 Driver status
Defrosting operation
In heating mode, condensate forms on the finned heat exchanger and this can freeze under certain conditions
and thus have an insulating effect. Because this can significantly impair the operation of the unit, the system
can switch to defrosting mode if required. The symbol for defrosting
is shown on the system display during
the defrosting process. Once the defrosting process has ended, the symbol disappears and the system carries
on with normal operation.
REMKO series RVS
16