4.2 Display on indoor unit
The display illuminates according to the settings.
1
Fig. 7: Display on indoor unit
1: Display
4.3 Keys on the remote control
1
10
7
6
9
8
5
2
3
4
Fig. 8: Keys on the remote control
1
"ON/OFF" key
(ON/OFF)
This key switches the room air conditioner on and
off.
2
"MODE" key
(operating mode)
This key is used to set the desired operating mode.
The automatic, cooling, dehumidification, heating
and recirculation modes are available.
3
"TIMER" key
(switch-on/switch-off delay)
Pressing this key activates the switch-on/switch-off
delay. The delay time can be set in 0.5 second
increments (30 minutes).
4
"+" and "–” key
(up arrow / down arrow)
Using these keys, the setpoint can be decreased
or increased in 1 °C increments. The keys are also
used to set various functions.
5
"SPEED” key
(fan speed)
Press this key to set the desired fan speed. The
low, medium, high, turbo and automatic functions
are available. A high fan speed enables higher per-
formance, quicker circulation of the room air and
larger casting distances, but at the cost of noise
development and air speed (draught phenomena).
In “Recirculation” mode, the “automatic” stage
cannot be used.
In the dehumidification mode, the fan speed
cannot be set manually.
6
“COOL” key
(cooling pre-setting)
7
“HEAT” key
(heating pre-setting)
This activates the self-clean function on the unit.
REMKO BL series
14
