![background image](http://html1.mh-extra.com/html/remington/r-4130/r-4130_instructions-for-use-manual_1437544006.webp)
4
ENGLISH
CLEANING DAILY
Ensure the shaver is switched off and unplugged from the mains.
Open the shaver head by pressing the release button on the front of the shaver (Fig. I) and
flipping open the head away from the body of the shaver (Fig. J).
Rinse the shaver head with warm water (Fig. K).
Close head assembly (Fig. L).
CLEANING WEEKLY
Perform the daily cleaning steps first.
Grasp plastic case around outer cutter and rotate toward the small dot on the shaver head
(Fig. M).
Pull outer cutter up and off the head assembly and remove inner cutter repeat steps 1-2
for the remaining cutters (Fig. N).
Brush hairs from inner and outer cutter (Fig. O).
Replace inner cutter (Fig. P).
Replace outer cutter by lining up the locator with the small dot (Fig. Q).
Twist towards large indent to lock in place. Repeat steps 4-6 remaining cutters (Fig. R).
CAUTION:
Never submerge your shaver in water. The shaver can be rinsed with water. The water
temperature should not exceed 70 degrees. Attention. Unplug the shaver before cleaning with
water. Keep the adaptor and cable dry.
CLEANING TRIMMER
Lubricate the teeth of the trimmer every six months with one drop of sewing machine oil.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE,
OR INJURY TO PERSONS:
An appliance should never be left unattended when plugged in to a power outlet, except
when charging. Keep the power adaptor and cord away from heated surfaces.
Make sure the power adaptor and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via the
Remington
®
Service Center.
Charge, use and store the product at a temperature between 15°C and 35°C.
ENGLISH
090249_REM_IFU R4130-7130_22L.indd GB_4
04.03.2009 22:37:57 Uhr